Mitsubishi Heavy Industries SC-SL2NA-E Anwenderhandbuch Seite 5

The diagram below shows the central control with its cover open.
Also, for the sake of the explanation, all the contents of the LCD display section are shown.
CENTER / REMOTE display
Displays which is in effect, the central control or the local remote controllers.
PROGRAM SET display
Displayed when a program is being set.
TIME SET display
Displayed when the current date and time are being set.
TIME display
Displays the time.
GROUP SET display
Displayed when the units to be managed are being set.
Program days of the week display
is displayed above today's day of the week and _ is displayed under each day of
the week for which the program has already been set.
ALL / GROUP / ONE display
Displays whether operations on this central control are for
all units, one group of units, or one unit.
GROUP No. / UNIT No. display
Displays the group number and indoor
unit number being set or monitored.
PROGRAM display
Displays the contents of the program set.
PROGRAM No. display
Displays the numbers of the programs that have been set.
MODE display
Displays the operation mode.
DEMAND display
Displayed during demand input.
MENU button
This button selects the setting mode.
ALL / GROUP / ONE button
This button selects ALL, GROUP, or ONE to be operated.
SELECT ( or ) button
This button is primarily used for selecting the group number
or unit number.
SET button
This button confi rms settings.
RESET button
Pressing this button during a setting operation cancels the last step.
CENTER / REMOTE button
This button selects centralized control or local remote control.
MODE button
This button selects the operation mode.
FAN SPEED button
This button adjusts the fan speed.
DEMAND SET button
This button sets the indoor unit for demand.
– 4 –