How To Confi Rm Program Settings - Mitsubishi Heavy Industries SC-SL2NA-E Anwenderhandbuch

2. Press the SET button.
3. Press the SELECT (
To select all the groups, select "88".
4. Press the SET button.
The group number is decided.
5. Press the SELECT (
Align the mark on top of the days of the week with the day of the week to be released from programming
as a holiday.
6. Press the SET button.
The ( ) display goes out and the display becomes as follows.
Note
• To release the multiples days of the week as holiday settings, repeat Steps 5 to 6.
• To release the holiday setting for the next group, in the state of Step 5, press a group number button or RESET
button to return to the state of Step 3. Repeat Steps 3 to 6.
• To end settings or to cancel a setting that is underway, press the MENU button.
How to Confi rm Program Settings
1. Press the MENU button and select
Each time you press this button, the display moves to the next step in the sequence in the diagram below.
The
or ) button or a GROUP No. button to select the group number to be set.
or ) button to select the day of the week.
1
3 3, 5, 7
Off
fl ashes.
2, 4, 6
.
– 26 –