How To Set "Run And Temp (Temperature Setting) At On Time; How To Set "Run Only At On Time - Mitsubishi Heavy Industries SC-SL2NA-E Anwenderhandbuch

2. How to Set "RUN and TEMP (temperature setting) at On time"

1 to 12. Input the On time.
Execute Steps 1 to 12 on Pages 19 to 20.
13. With the Off time (hour) section displaying "--", press the SET button.
If you press the RESET button with the Off time set, the Off time (hour) section display becomes "--".
14. Press the TEMP button (
15. Press the SET button.
The set temperature is decided and the setting is complete. "_" lights up under the set day of the week (TUE→
TUE) and the display becomes as in the diagram.
Select the next program number.

3. How to Set "RUN only at On time"

1 to 12. Input the On time.
Execute Steps 1 to 12 on Pages 19 to 20.
13. With the Off time (hour) section displaying "--", press the SET button.
If you press the RESET button with the Off time set, the Off time (hour) section display becomes "--".
14. With "--" °C displayed, press the SET button.
If you press the RESET button with the temperature display fl ashing, the set temperature section display becomes "--" °C.
This completes the setting. "_" lights up under the set day of the week (TUE→TUE) and the display becomes as
in the diagram. Select the next program number.
13, 15
or ) to set the temperature.
13, 14
– 21 –
14