Mitsubishi Heavy Industries SC-SL2NA-E Anwenderhandbuch Seite 26

3. Press the SELECT (
To select all the groups, select "88".
4. Press the SET button.
The group number is decided.
5. Press the SELECT (
Align the mark on top of the days of the week with the day of the week to be programmed as a holiday. If
you press , the
6. Press the SET button.
The day of the week to be set as a holiday is decided. ( ) of the holiday lights up and the display becomes as
follows.
Note
• To set multiples days of the week as holidays, repeat Steps 5 to 6.
• To set the next group as a holiday, in the state of Step 5, press a group number button or RESET button to return
to the state of Step 3. Repeat Steps 3 to 6.
• To end settings or to cancel a setting that is underway, press the MENU button.
❚ Releasing a Holiday Setting
1. Press the MENU button and select
Each time you press this button, the display moves to the next step in the sequence in the diagram below.
The
or ) button or a GROUP No. button to select the group number to be set.
or ) button to select the day of the week.
mark moves to the right while fl ashing. If you press
1
3
3, 5
Off
fl ashes.
2, 4, 6
.
– 25 –
, the mark moves to the left.