How To Set An External Timer Unit - Mitsubishi Heavy Industries SC-SL2NA-E Anwenderhandbuch

How to Set an External Timer Unit

An off-the-shelf timer can be connected to this central control. Set the indoor units to be run by the external timer.
The set indoor unit is run or stopped by the signals from the external timer.
1. Press the ALL / GROUP / ONE button and select
To set all the managed units, select
To set one or more groups, select
To select all the groups, select "88".
To set one or more individual units, select
number.
2. Press the TIMER INPUT SET button.
The light up.
To set another group or individual indoor unit, repeat Steps 1 and 2.
Note
• External timer input is only valid for indoor units set to
• To cancel timer setting, in the state in Step 1, press the TIMER INPUT SET button again.
The goes out and operations under timer control are disabled.
• During external timer input, the
• Even during external timer input, the contents of operation can be changed.
• During external timer input, the timer unit settings can not be changed.
1
.
, then press the SELECT (
, then press the SELECT (
fl ashes.
– 28 –
2
, , or .
or ) button to set the group number.
or
or .
) button to set the unit