Mitsubishi Heavy Industries SC-SL2NA-E Anwenderhandbuch Seite 21

3. Press the SELECT (
To set the same program for all groups, select "88".
4. Press the SET button.
The group for which the program is to be set is decided.
5. Press the SELECT (
Align the mark on top of the days of the week with the day of the week to be programmed.
If you press , the
If you press the , the
if you want to make the same settings for all these days, select "Mon to Fri", "Mon to Sat" or "Sun to Sat" (every
day).
6. Press the SET button.
The day of the week to be programmed is decided.
7. Press the SELECT (
If you press , the mark next to the number moves down while fl ashing. If you press
up.
8. Press the SET button.
The program number is decided.
9. Press the SELECT (
10. Press the SET button.
The On time (hour) lights up and the On time (hour) is decided.
11. Press the SELECT (
12. Press the SET button.
The On time (minute) lights up and the On time (minute) is decided.
13. Press the SELECT (
14. Press the SET button.
The Off time (hour) lights up and the Off time (hour) is decided.
15. Press the SELECT (
16. Press the SET button.
The Off time (minute) is set and the setting is complete. "_" lights up under the set day of the week (TUE→
TUE) and the display becomes as in the diagram.
("_" indicates that a program has been set for the displayed day of the week.)
Select the next program number.
or ) button or a GROUP No. button to be set.
or ) button to set the day of the week.
mark moves to the right while fl ashing. If you press
mark on top of "Mon to Fri", "Mon to Sat" or "Sun to Sat" (every day) fl ashes once, so
or ) button to select the program number.
or ) button or a GROUP No. button to set the On time (hour).
or ) button or a GROUP No. button to set the On time (minute).
or ) button or a GROUP No. button to set the Off time (hour).
or ) button or a GROUP No. button to set the Off time (minute).
– 20 –
, the mark moves to the left.
, the mark moves