Using The Refrigerator - Waeco CoolMatic CRX0050 Montage- Und Bedienungsanleitung

CRX0050, CRX0065, CRX0080
8.2

Using the refrigerator

A
NOTICE!
 Do not place any electrical devices inside the refrigerator. The
only exceptions are devices approved for the purpose by the
manufacturer.
 Ensure that food or liquids in glass containers do not become
too cold. Liquids expand when they freeze and can therefore
destroy glass containers.
 Food may only be stored in its original packaging or in suitable
containers.
 Make sure that you only put items in the refrigerator which may
be kept at the selected temperature.
The fridge conserves fresh foodstuffs. You can also conserve frozen food-
stuffs in the freezer compartment and freeze fresh foodstuffs.
➤ Switch the refrigerator on by pressing the on/off button.
I
NOTE
After switching on, the refrigerator needs some time before the
compressor starts up.
Setting the temperature
➤ Press the temperature setting button to set the temperature to one of four
levels between "cool" and "very cold".
The number of LEDs which light up above the temperature setting button
indicate the temperature range:
– 1 = cool
– ...
– 4 = very cold
➤ Press the temperature setting button again to switch from level 4 to
level 1.
I
NOTE
The cooling performance can be affected by:
 The ambient temperature
 The amount of food to be conserved
 The frequency with which the door is opened.
If the ambient temperature is at 16 °C – 20 °C, set the refrigerator
to at least level 2.
EN
Using the refrigerator
45