HP PHOTOSMART PLUS e-ALL-IN-ONE B210 Serie Erste Schritte Seite 6

Networked printer setup and use
Changing from USB to wireless network connection
If you initially set up your printer using a USB connection to your computer, you can switch the
connection to a wireless network connection by following these steps.
USB
to
To change from USB to wireless connection:
Wireless
1. On the HP Photosmart control panel, press
2. Select Wireless Setup Wizard on the
3. Follow the steps in the Wireless Setup
4. To add the printer, click Start > All
5. Select the Network connection option.
6. Select the HP Photosmart from the list and
7. When complete, you will have both USB
If your printer Troubleshooting for a wireless printer setup
is not found
Check that your printer is connected to your network
during software
Run a Wireless Network Test to check that your printer is on the network. To do this:
installation...
1. On the HP Photosmart control panel, press the Wireless button to display the Wireless
2. Select Run Wireless Network Test on the display.
3. The Wireless Network Test Report is automatically printed. Review the report:
If your printer is not connected to the network:
1. Press the Wireless button to open the Wireless menu on the printer display. Select
2. Follow the instructions on the screen.
For additional help with setting up a wireless connection, go to the Wireless Printing Center
site:
Windows
the Wireless button to display the Wireless
menu on the printer display.
display.
Wizard to connect the printer.
Programs > HP > Photosmart Plus B210
series > Connect a New Printer.
follow the instructions on the displayed
screens.
and network printer ICONs in your printer's
folder. You can chose to keep or delete the
USB printer ICON.
menu on the printer display.
• Check the top of the report to see if something failed during the test.
• See the Diagnostics Summary for all tests that were performed, and whether or not
your printer passed.
• See the Configuration Summary to find out the Network Name (SSID) to which your
printer is currently configured for connection, plus Hardware Address (MAC), and IP
Address.
Wireless Setup Wizard on the display.
www.hp.com/go/wirelessprinting
Mac
To change from USB to wireless connection:
1. On the HP Photosmart control panel,
press the Wireless button to display the
Wireless menu on the printer display.
2. Select Wireless Setup Wizard on the
display.
3. Follow the steps in the Wireless Setup
Wizard to connect the printer.
4. To add the printer, go to System
Preferences, select Print & Fax, then
click the + button at the bottom of the
Printers list area on the left. Select your
printer from the list.
6