Instructions To User - Gima OXY-6 Betriebs- Und Wartungsanweisungen

13 ENGLISH

Instructions to User

Read these instructions carefully before using this equipment. These
instructions describe the operating procedures to be followed strictly. Failure
to follow these instructions can cause measuring abnormity, equipment damage
and personal injury. The manufacturer is NOT responsible for the safety, reliability
and performance issues and any monitoring abnormality, personal injury and
equipment damage due to user's negligence of the operation instructions. The
manufacturer's warranty service does not cover such faults.
- The uncomfortable or painful feeling may appear if using the device ceaselessly,
especially for the microcirculation barrier patients. It is recommended that the
sensor should not be applied to the same finger for over 2 hours.
- For the individual patients, there should be a more prudent inspecting in the
placing process. The device can not be clipped on the edema and tender tissue.
- The light (the infrared is invisible) emitted from the device is harmful to the eyes,
so the user and the maintenance man, can not stare at the light.
- Testee can not use enamel or other makeup on the finger.
- Testee's fingernail can not be too long.
- Please peruse the relative content about the clinical restrictions and caution.
1. Safety
1.1 Instructions for Safe Operations
- Check the main unit and all accessories periodically to make sure that
there is no visible damage that may affect patient's safety and monitoring
performance. It is recommended that the device should be inspected once
a week at least. When there is obvious damage, stop using the oximeter.
- Necessary maintenance must be performed by qualified service
engineers ONLY. Users are not permitted to maintain it by themselves.
- The oximeter cannot be used together with the devices not specified in
User's Manual.