Deleting Inactive Stations; Fm (Vhf) Operation; Switching To Fm Radio Mode - TechniSat DIGITRADIO 1 Bedienungsanleitung

> Press the MENU button and use the t or u buttons to select the [Volume
Adjustment] submenu.
> Press the OK button.
> Use t or u to select the compression rate:
DRC high - High compression
DRC low - Low compression
DRC off - Compression deactivated.
> Confirm by pressing the OK button.

7.2.9 Deleting inactive stations

This menu item is used for removing old stations that can no longer be received from
the list of stations.
> Press the MENU button and use the t or u buttons to select the [Delete
Inactive Station] submenu.
> Press the OK button.
The [Clear] query checks whether the inactive station should be deleted.
> Use t or u to select [Yes] and confirm by pressing the OK button.
44
8

FM (VHF) operation

8.1

Switching to FM radio mode

> Press the DAB/FM button to switch to FM mode.
> [FM] appears in the display.
When first switched on, the frequency is set to 87.5 MHz.
If you have already set or saved a station, the radio plays the last station set.
The station name appears with RDS stations.
Align the aerial to improve reception (Section 5.3.3).
EN
FR
IT
NL
NW
DK
PL
CZ
SK
45