Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
When the section of hair is wrapped around
the hair roller
half way, switch on hot air for
13
approx. 8–10 seconds on the highest setting
or until you feel the section of hair has been
dried or styled sufficiently.
Switch off the heat function and continue roll-
ing the hair roller
toward the scalp. Whilst
13
rolling, be sure to keep the section of hair taut.
Switch on the heat function for 8 more seconds.
Note: Use a lower heat setting near the head
to prevent burns.
Press the lock / unlock lever
roller attachment
out of the middle of the
1
roller
. The hair roller
13
hair.
Repeat the process with the next section of hair.
Leave all hair rollers
13
rollers
and the hair have cooled completely.
13
Note: Use your hairspray so your hairstyle
holds even better and longer.
Slowly and carefully unroll the hair roller
from the hair so it keeps its shape.
Using the cool-down setting
Use the cool-down setting to set your style and
add more shine to your hair.
To activate the cool-down setting, either hold
the cool shot button
4
to position
.
5
To switch off the cool-down setting, release the
cool shot button
or slide the sliding switch
4
to position 0.
5
Tip: To cool your hair even faster, use the cool-
down setting each time you have wrapped hair
on a hair roller
.
13
Allow the attachments
1
before removing them.
To remove the attachment
the release button
, slightly turn the attach-
11
ment
,
,
to the right and slide it off the
1
12
14
device.
Once you have finished your hair, switch off
the device and unplug from the socket.
and slide the
2
is now set in your
13
in your hair until the
13
or set the sliding switch
,
,
to cool down
12
14
,
,
, press
1
12
14
Start-up / Cleaning and Care / Disposal
Cleaning and Care
TO LIFE BY ELECTRIC SHOCK!
Remove the plug from the socket
before cleaning the hot air brush. Otherwise
there is a risk of electric shock.
Only clean the hot air brush as specified.
Never allow liquid to enter the hot air brush.
Do not clean the hot air brush in the dishwasher.
Do not clean the hot air brush with highly flam-
mable liquids.
Never use corrosive or abrasive cleaners.
Clean the hot air brush with a damp cloth.
Clean the housing of the hot air brush and the
attachments
,
1
12
ened with warm water.
Remove any lint, dust or hair from the air outlet
and the air intake filter
3
before each use.
If very dirty, remove the attachments
from the device and rinse thoroughly under
14
running water.
Thoroughly dry the attachments
after cleaning. Do not use the attachments
,
again until they are completely dry.
12
14
Carefully remove the hair from the rollers
with your hand.
If the rollers
are very dirty, rinse thoroughly
13
under running water. Do not use the rollers
again until fully dried.
Disposal
The packaging and ancillary packing
consist of environmentally friendly
materials. They can be disposed of at
your local recycling facility.
Do not dispose of electric equip-
ment in the household waste!
In accordance with the European Directive on waste
electrical and electronic equipment and its transpo-
sition into national law, used electrical equipment
DANGER
,
with a soft cloth damp-
14
with a brush
7
,
1
12
,
,
1
12
14
13
GB/IE
,
,
1
13
21
Werbung
Kapitel
Inhaltsverzeichnis
