ENGLISH
FEATURES
•
Time delay to start
•
Short circuit protection
•
DC protection
•
Thermal cut off
•
Large capacitors provide storage of bass
•
High effective cooling equipment
PRECAUTIONS
•
Don't put the amplifier vertically on its back.
•
Always use a power source of adequate capacity.
•
Don't turn on the power of multiple power amplifiers at the same
time. Don't let the ventilation holes on the body of the amplifier get
obstructed in any way.
•
Input level adjustment controls are provided on each channel.
•
Output can be used with binding posts, balance posts or speakon.
•
When the amplifier works in stereo, bridge mono or parallel mono
mode, the switch must be on the same mode.
•
When cleaning the amplifier, wipe it with a piece of dry cloth.
If the case is very dirty, disconnect the AC cord from the power
source, than wipe it with damp cloth and wipe thoroughly dry.
Never use solvents, a chemical cloth or spray insecticides as they
may cause discoloration or peeling of the case.
•
In case of a technical defect, disconnect the power cord and contact
your dealer.
AX400
2