Food Processor - Vitek VT-1618 R Die Betriebsanweisung

ENGLISH

FOOD PROCESSOR

Appliance description
1. Processor housing
2. Swivel work head
3. ON/OFF knob/speed control
4. Pulse mode button «PULSE»
5. Swivel work head opening button
6. Knives storage compartment
7. Antiskid leg
8. Grating nozzle for fine grinding «А»
9. Grating nozzle for rough grinding «В»
10. Chopper for cutting into rough pieces «С»
11. Chopper for fine slicing «D»
12. Grating nozzle for grinding «Е»
13. Knife for fine cutting potatoes for frying «F»
14. Gratings/choppers/knives disk-shaped holder
(8-13)
15. Knife for rough cutting potatoes for frying Нож
для крупной нарезки картофеля фри «G»
16. Knife disk-shaped holder (15) «G»
17. Upper knife for grinding in the bowl (21)
18. Knife protective housings (17, 19)
19. Main knife for grinding in the bowl (21)
20. Nozzle holding shaft
21. Glass bowl
22. Bowl cap pusher
23. Glass bowl cap
24. Bowl cap seal ring
25. Beater
26. Nozzle for making pastry
27. Shovel for taking out the processed foodstuff
28. Dispensing tap
29. Jug cap
30. Jug cap seal ring
31. Knife protective housings (32, 33)
32. Upper knife for grinding in the jug
33. Main knife for grinding in the jug
34. Juicer cap pusher
35. Juicer cap
36. Juicer cap seal ring
37. Detachable juicer separator
38. Juicer
39. Glass jug
40. Storage lid for the blender
41. Storage lid for the bowl
Important safeguards
Please, read this operation manual carefully
before using the appliance.
• Keep this operation manual for future reference.
• Make sure the voltage characteristics enlisted on
the appliance meet the voltage parameters of the
household supply line before plugging in.
• Install and operate on the level surface.
• Do not use outdoors.
1618.indd 4 1618.indd 4
• Use the components and utilities supplied with
the appliance only.
• Do not operate the appliance in case the power
cord, power cord plug or other component is
damaged.
• In case of power cord damage and for processor
repair apply to the authorized service center.
• Wash all the detachable components contacting
the foodstuff carefully before using the appliance
first time.
• Take off the protective caps from the grinding
knives before operating.
• Take care while handling the grating nozzles, chop-
pers, and knives. Be aware of the sharp edges.
• Do not exceed the recommended amount of the
foodstuff while processing.
• Do not push the foodstuff through the neck of the
cap by fingers or by any other objects (shovel, for
example). Use the pusher for such purposes.
• Switch processor off and unplug form the wall
outlet before detaching any nozzle.
• Switch the processor off and unplug from the wall
outlet immediately after finishing processing.
• Switch the appliance off if unattended.
• Store at the places inaccessible by children.
• Special safety guards should be taken when used
by children or invalids, or near by.
• Do not immense the electric motor block into wa-
ter or into any other liquid, do not wash it under
the water jet. Use damp cloth for cleaning.
• For household use only. Any commercial utiliza-
tion of the processor is prohibited.
Important information
For the safety purposes the processor is equipped
with swivel work head intended for torque transfer
from the electric motor to the nozzles located in the
bowl or in the jug. While the swivel work head is in
off-position the processor is not working.
• Press button (5) before operating, swivel work
head (2) is lifted and turned providing access to
the bowl (21) or to the jug (39).
• After installation of the bowl (21) or the jug (39),
attach the nozzle you need, turn the work head
(2) up to the stop, and press on it to lock.
• Insert the power cord plug into the wall outlet.
Turn the knob (3) to switch on the processor and
to choose the nozzle rotary speed.
• Press button "PULSE" (4) to switch on the pulse
operating mode.
Processor operation
Processor bowl
Grinding the foodstuff
1. Press button (5), swivel work head (2) is lifted
and turned.
4 4
03.05.2007 11:56:58 03.05.2007 11:56:58