Werbung
ENGLISH
FOOD PROCESSOR
DESCRIPTION
1. Protecting cover of the blender drive
2. Compartment for the knives storage
3. Power ON knob/speed control
4. PULSE operating mode button
5. Place for power cord winding
6. Nozzle drive axis
7. Housing
8. Knives disk-shaped holder
9. Graters/choppers:
A – grater for fine grinding
B – grater for rough grinding
С – chopper for fine slicing
D – chopper for rough slicing
E – grater for grinding
F – knife for slicing the potatoes for frying
10. Bowl for processing the foodstuff
11. Protecting covers of the knives (12, 13)
12. Main grinding knife
13. Upper grinding knife
14. Beater
15. Nozzle for making pastry
16. Bowl cap
17. Pusher
18. Citrus juicer separator
19. Citrus juicer cone
20. Juicer with separator
21. Juicer cap
22. Juicer cap pusher
23. Blender bowl
24. Blender bowl cap
25. Dispensing tap
26. Shovel for extracting the processed food-
stuff
Important safeguards
Please, read this operation manual carefully
before using the appliance.
• Save this operation manual, and keep it at
hand for future reference.
• Make sure the voltage characteristics enlisted
on the appliance meet the voltage parameters
of the household supply line before plugging in.
• Install and operate on the level surface.
• Do not use outdoors.
• Use only the components and utilities sup-
plied with the appliance.
• Do not operate the appliance in case the pow-
er cord, power cord plug or other component
is damaged.
1616new.indd 4
1616new.indd 4
• Apply to the authorized service center if you
need to repair the damaged power cord or the
processor of the appliance.
• Wash all the detachable components contact-
ing the foodstuff carefully before using the ap-
pliance first time.
• Take off the protective caps from the grinding
knives before operating.
• Take care while handling the grating nozzles,
choppers, and knives. Be aware of the sharp
edges.
• Do not exceed the recommended amount
of the foodstuff while processing to avoid an
overflow.
• Do not push the foodstuff through the neck
of the cap by fingers or by any other objects
(shovel, for example). Use the pusher for such
purposes.
• Switch the processor off and unplug the pow-
er cord form the wall outlet before detaching
any nozzle.
• Switch the processor off and unplug the pow-
er cord from the wall outlet immediately after
finishing processing.
• Switch the appliance off if unattended.
• Store at the places inaccessible by children.
• Special safety guards should be taken when
used by children or invalids, or near by.
• Do not immense the electric motor block into
water or into any other liquid, do not wash it un-
der the water jet. Use damp cloth for cleaning.
• For household use only. Any commercial utili-
zation of the processor is prohibited.
Important information
For the safety purposes the processor is
equipped with the system interlocking the proc-
essor switching on.
The processor will not be switched on if:
- the protecting cap of the blender (1) is in-
stalled improperly;
- the bowl (10) or juicer (20) is installed improp-
erly or without the caps (16, 21);
- the blender bowl (23) is installed properly, but
the bowl (10) is not installed and is not cov-
ered by the cap (16), or the blender bowl is not
covered by the cap (24).
Using the processor
Processor bowl
Grinding the foodstuff
1. Install the protecting cap of the blender drive
4
4
18.07.2008 12:19:35
18.07.2008 12:19:35
Werbung
