Vitek VT-1618 R Die Betriebsanweisung Seite 6

ENGLISH
8. Insert the power cord plug into the wall outlet.
9. Turn the knob (3) to switch processor on, or turn
on pulse operating mode by pressing button
"PULSE" (4).
10. After finishing food processing switch the appli-
ance off by turning the knob to the "OFF" posi-
tion, and disconnect the power cord plug from
the wall outlet.
11. Press button (5), swivel work head (2) is lifted
and turned.
12. Remove the cap (23), take out the shaft (20) with
the nozzle (25) attached, extract the foodstuff
from the bowl (21) by the shovel (27).
Attention:
• Never use the nozzle (25) for making the pastry.
• Do not overfill the bowl with the fluid foodstuff.
Jug
Grinding the foodstuff
1. Press button (5), swivel work head (2) is lifted
and turned.
2. Install the jug (39).
3. Remove the protective cover (31) from the knife
(33) and install it into the jug (39). If you need to
use the additional knife (32), remove the pro-
tective cover (31) and install the additional knife
above the main knife (33).
4. Put some foodstuff into the jug (39).
5. Cover the jug (39) by the cap (29) with seal ring
(30) put on.
6. Install the dispensing tap (28) into the cap (29).
7. Turn the work head (2), and push on the head
from above to lock it in the on-position.
8. Insert the power cord plug into the wall outlet.
9. Turn the knob (3) to switch processor on, or turn
on pulse operating mode by pressing button
"PULSE" (4).
10. After finishing food processing switch the appli-
ance off by turning the knob to the "OFF" posi-
tion, and disconnect the power cord plug from
the wall outlet.
11. Press button (5), swivel work head (2) is lifted
and turned.
12. Remove the cap (29), take out the knife (33) or
two knives simultaneously. Extract the foodstuff
from the jug (39) by the shovel (27).
Attention:
• Be careful while handling the knives. Be aware of
the sharp edges.
• When mixing up the foodstuff in the jug do not
exceed the maximum amount of the fluid food-
stuff, otherwise it would splash out.
Juicer
1. Press button (5), swivel work head (2) is lifted
and turned.
1618.indd 6 1618.indd 6
2. Install the jug (39).
3. Install the juicer (38) with detachable separator
(37) into the jug (39).
4. Cover the juicer by the cap (35) with seal ring
(36) put on.
5. Turn the work head (2), and push on the head
from above to lock it in the on-position.
6. Insert the power cord plug into the wall outlet.
7. Turn the knob (3) to switch processor on, set the
rotary speed you need depending on the type of
fruits or vegetables utilized to prepare the juice.
Use the pusher (34) to deliver the foodstuff.
Press on the pusher lightly to force the foodstuff
through the cap neck gradually.
8. After finishing food processing switch the appli-
ance off by turning the knob to the "OFF" posi-
tion, and disconnect the power cord plug from
the wall outlet.
9. Press button (5), swivel work head (2) is lifted
and turned.
10. Remove the cap (35), take out the juicer (38),
and pour the juice out off the jug (39).
Processor cleaning
• After finishing the foodstuff processing and be-
fore cleaning always turn off the appliance and
unplug from the wall outlet.
• It is recommended to wash the detachable com-
ponents by warm water with neutral detergent.
Also you can use a dishwasher for cleaning the
detachable components of the processor.
• Wipe the housing of the processor with the soft
damp cloth. Do not immense the processor hous-
ing into the water. Do not wash the appliance un-
der the water jet.
• Do not use a stiff sponge, abrasive or aggressive
detergent, and dissolvent.
Storage
• Make sure the processor is disconnected from
the wall outlet before putting it in the storage.
• Follow the instructions of the section "Processor
cleaning".
• Use the compartment (6) to store the gratings,
choppers and knives for cutting potatoes for fry-
ing.
Attention! The cutting blades of the knives are
very sharp and dangerous, handle the knives
carefully!
• Store the appliance in the clean and dry place.
Foodstuff processing examples
The time of processing is approximate. It depends
on the quality of the foodstuff and the grinding
range.
6
03.05.2007 11:56:58 03.05.2007 11:56:58