Food Processor; Safety Measures - Vitek VT-1617 Die Betriebsanweisung

FOOD PROCESSOR

DESCRIPTION
1. Pusher
2. Processor bowl lid
3. Processor bowl
4. Drive shaft
5. Electro motor unit
6. On handle/speed control
7. Attachments holder
8. Knife attachment for chopping
9. Attachment for blending/beating
10. Dough attachment
11. Disc for setting graters/shreddings
12. Coarse grater
13. Knife for cutting (shredding)
14. Fine grater
15. Dispensing tap
16. Blender bowl lid
17. Blender bowl
18. Blender bowl knives set
19. Seal ring
20. Spatula

SAFETY MEASURES

Please, read this operation manual carefully
before using the appliance.
•
Keep this operation manual for future refer-
ence.
•
Make sure the voltage characteristics speci-
fied on the appliance meet the voltage pa-
rameters of the household supply line before
plugging in.
•
Use the appliance on the flat even surface.
•
Do not use the unit outdoors.
•
Use only the details and parts, supplied with
the unit.
•
Do not use the unit if the power plug, the cord
and other parts are damaged.
•
In case of damage of the power cord or for the
repair of the processor, apply to the autho-
rized service center.
•
Before using the appliance for the first time,
thoroughly wash all the removable parts,
which will contact products.
•
Be careful when holding grater/shredding
attachments or blades, as they have sharp
edges.
•
Do not exceed the recommended quantity of
products while processing them.
VT-1617.indd 3 VT-1617.indd 3
ENGLISH
•
Never push the products with your fingers or
other objects (for instance, spatula) into the
throat of the cover while the unit is operating.
Use only the pusher for this
•
Switch off the unit and take the plug out of the
socket before removing any
•
Immediately after operation, switch off the unit
and take the plug out of the socket.
•
Never leave the operating appliance unat-
tended.
•
Keep the unit out of reach of children.
•
Close supervision is necessary when the appli-
ance is used by children or disabled persons.
•
This unit is not intended for usage by children
or disabled persons unless they are given all
the necessary instructions on safety measures
and information about danger, which can be
caused by improper usage of the unit.
•
Do not immerse the electro motor unit into
water or other liquids, and do not wash under
water. Use damp cloth to clean the electro mo-
tor unit.
•
The unit is intended for household usage only
commercial usage of the processor is prohib-
ited.
USING THE FOOD PROCESSOR
PROCESSOR BOWL
Grinding the products
1. Set the drive shaft (4) into the grooves on the
electro motor unit (5).
2. Set the processor bowl (3) on the drive shaft
(4) and lock it, turning clockwise.
3. Set the attachments holder inside the pro-
cessor bowl (7).
4. Set the knife attachment for chopping (8) on
the holder (7).
5. Put the necessary quantity of products into
the processor bowl (3).
6. Close the bowl (3) with the lid (2) and turn the
lid clockwise, to match the ledge on the lid
with the deepening on the bowl.
7. Insert the plug into the socket.
8. Switch on the processor, by setting the han-
dle (6) to the II position.
9. After operation, switch off the processor, by
setting the handle (6) to the "O" position, and
take the plug out of the socket.
10. Remove the processor bowl (3), by turning it
counterclockwise, remove the lid (2), take out
3
purpose.
attachment.
;
14.06.2011 10:49:41 14.06.2011 10:49:41