Location - Gram Roll-in 1500 Bedienungsanleitung

Location

When receiving the cabinet, check the packaging material for damage.
If any damage occurs at the packaging material, it should be considered if the cabinet
might have been damaged too. If the damage is substantial, please contact your dealer.
The transport pallet can be removed by loosening the screws that fasten the pallet to the
cabinet.
This task requires at least 2 persons.The heaviest part of the cabinet is at the
top. Be aware of this, when removing the transport pallet.
Fig.1
If the cabinet has been transported in horizontal position it must stand upright at
least 2 hours before it is started to allow the oil from the compressor to run back.
765041476 Rev. 000 30