Routine Maintenance - Ingersoll-Rand QM Serie Technische Produktdaten

Transducer Cable:
The Transducer can be rotated so that the cable can be routed out of the tool in multiple orientations.

Routine Maintenance

General Instructions:
Maintenance and repairs should be made only by authorized trained personnel; when such service or repair is required for these tools, contact
the nearest Ingersoll Rand Authorized Service Center.
For Authorized Trained Personnel:
For 'Assembly / Disassembly' and other maintenance instructions regarding these products, see Maintenance Information Manual 04581351
(QM3), 04581369 (QM5), 04581377 (QM7), and 04581385 (QM9) located at www.ingersollrandproducts.com, or contact the nearest
Ingersoll Rand Office or Distributor.
Disconnect the tool from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive
safety measures reduce the risk of starting the tool accidentally.
QM3 Model Identification
Q
M 3 S
S Straight
M Power Unit
QM5 Model Identification
Q
M 5 S
S Straight
M Power Unit
Z Offset
04581278_ed8
CAUTION
NOTICE
WARNING
S 008
008
S Single Transducer
B Power Unit 012
016
020
S 035
035
S Single Transducer
050
B Power Unit
055
090
L
L Light 62S06 6" long, 50mm float, 3/8" square
H Heav y
92S06 9" long, 50mm float, 3/8" square
S Locked
22S06 12" long, 50mm float, 3/8" square
62S08 6" long, 50mm float, 1/2" square
92S08 9" long, 50mm float, 1/2" square
22S08 12" long, 50mm float, 1/2" square
L
62S06 6" long, 50mm float, 3/8" square
L Light
92S06 9" long, 50mm float, 3/8" square
H Heavy
S Locked
22S06 12" long, 50mm float, 3/8" square
62S08 6" long, 50mm float, 1/2" square
92S08 9" long, 50mm float, 1/2" square
22S08 12" long, 50mm float, 1/2" square
EN
62S06
62S06
EN-2