Routine Maintenance; Model Identification - Ingersoll-Rand ELS Serie Technische Produktdaten

EN

Routine Maintenance

General Instructions:
Maintenance and repairs should be made only by authorized trained personnel; when such
service or repair is required for these tools, contact the nearest Ingersoll Rand Authorized
Service Center.
For Authorized Trained Personnel:
For 'Assembly / Disassembly' and other maintenance instructions regarding these products, see
Maintenance Information Manual 16575334 (EL, EP and ET 34V DC Series), located at
www.ingersollrandproducts.com, or contact the nearest Ingersoll Rand Office or Distributor.
Disconnect the tool from the power source before making any adjustments, changing
accessories, or storing the tool. Such preventive safety measures reduce the risk of starting
the tool accidentally.

Model Identification

High Torque
Power: 34V DC
Cable Length: 8ft. Straight
Sound: 69 dBA
Reversible: Yes
Control Configuration
Electric L Lever Start
P Push-To-start
T Trigger
(Dwg. TPD1891)
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
EN-3
CAUTION
WARNING
26
E L
Torque
(Max. Approx)
(In.-lbs.) (Nm)
15 1.69
26 2.93
40 4.52
NOTICE
07
S
Speed
05 500 rpm
08 800 rpm
11 1100 rpm
12 1200 rpm
16 1600 rpm
25 2500 rpm
1S5
Source
Bit Style
Voltage
1S5 Angle
S 34V
S3 Angle
S5 Angle
16578684_ed1