Customer Service; Repair Order And Advice On Faults - Gaggenau RT 242 Gebrauchsanleitung

Fault
Appliance has no
refrigeration capacity.
The light does not work.
The display does not
illuminate.
The cool-fresh compartment
is too warm.
x

Customer service

Your local customer service can be found in
the telephone directory or in the customer-service
index. Please provide customer service with
the appliance product number (E-Nr.) and production
number (FD-Nr.).
These specifications can be found on the rating plate.
To prevent unnecessary call-outs, please assist
customer service by quoting the product
and production numbers. This will save you additional
costs.
Possible cause
Appliance has been switched off.
Power failure.
The fuse has been switched off.
The mains plug has not been inserted
properly.
The fixed setting has been set too high
or too low (e.g. if there is frost
in the "cool-fresh" compartment).
Remedial action
Press the On/Off button.
Check whether the power is on.
Check the fuse.
Check whether the mains plug is secure.
The temperature in the cool-fresh compartment can
be set warmer and/or colder.
Setting the temperature:
1. Switch off the appliance with the On/Off
button 1.
2. Simultaneously press On/Off button 1 and
temperature setting button 3 for 1-2 seconds
until "88" flashes on the temperature display 6.
3. Keep pressing temperature setting button 3 until
the required temperature is displayed.
After one minute, the set temperature is saved.

Repair order and advice on faults

Contact information for all countries can be found
on the enclosed customer service list.
GB 0844 8928988
IE 01450 2655
US 877 442 4436
Calls from a BT
landline will be
charged at up to
3 pence per
minute. A call
set-up fee of up
to 6 pence may
apply.
toll-free
35