Vacuum Dust Extraction; Adapter For External Vacuum Extraction (With Reducer Piece); Attaching / Detaching Sanding Sheets - Parkside PDS 290 A1 Bedienungs- Und Sicherheitshinweise

Preparing for use
Note: Always switch on the delta sander before
bringing it into contact with the workpiece material.
Switching on the device:
M ove the ON / OFF switch
setting "I".
Switching off the device:
M ove the ON / OFF switch
setting "0".
Selecting the oscillation speed:
You can preselect the oscillation speed you require
using the oscillation speed setting wheel
can also change the speed whilst you are working.
The way to determine the optimum oscillation
speed for your task is to carry out a practical test.
Setting 1 = lowest oscillation speed /
Setting max. = highest oscillation speed

Vacuum dust extraction

Q
DANGER oF FIRE! There is
the danger of fire when working with electrical
devices that have a dust box or can be connected
to a vacuum cleaner. Under certain conditions the
wood dust in the dust extraction bag (or in the vac-
uum's dust bag) may ignite, e.g. as a result of flying
sparks generated when abrading metals or metal
objects left in wood. This can happen particularly if
the wood dust is mixed with paint residue or other
chemicals and the abraded particles are hot from
prolonged abrasion. Therefore you must empty the
device's dust collection box and the vacuum clean-
er's dust bag before taking a break or stopping
work and always avoid overheating of the abrad-
ed particles and the device.
Wear a dust mask!
Always pull the mains plug is
out of the socket before doing any work on the
device.
30 GB/MT
Q
Connection:
forwards into
1
backwards into
1
. You
2
Removal:
Q
of the socket before doing any work on the device.
Attaching:
Detaching:
Materials:
Wood (sanding sheets included), paint*, stone*
*depending on the sanding sheet
Adapter for external vacuum
extraction (with reducer piece)
P ush the adapter for external vacuum extrac-
tion into the dust extraction spout
7
When doing this observe the guide markings
on the device and adapter. Turn the suction
nozzles clockwise to lock.
I f it is necessary to use the reducer piece
push the reducer piece into the adapter for
external vacuum extraction
P ush the hose of a suitable dust extraction de
vice approved for that purpose (e.g. a workshop
vacuum cleaner) on to the adapter for external
vacuum extraction or the reducer piece
7
P ull the hose of the dust extraction device off
the adapter for external vacuum extraction
Turn anticlockwise to unlock the dust extraction
port .
4
P ull off the adapter for external vacuum extrac-
tion (with the reducer piece
7
Attaching / detaching
sanding sheets
Always pull the mains plug is out
S anding sheets are attached to the backing plate
by means of the hook and pile fastening.
6
S imply pull the sanding sheet off the backing
plate (see Fig. B).
6
.
4
,
8
.
7
.
8
.
7
if used).
8