Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Topcom Allure 270
a. To record OGM2
•
Press and hold
•
After you hear a beep, release
•
Press
again to end recording.
•
The device will playback the recorded message after a beep.
To check your OGM2 again, press
b. To set the OGM2 caller ID number
•
Press
for 3 seconds, the display language is shown.
•
Press repeatedly
•
Enter the telephone number by means of the numerical keypad.
•
Press
confirm.
13.2 Turning Answering Machine ON/OFF
•
Press
to switch the answering machine ON or OFF. The setting is displayed.
13.3 Day and Time stamp
Every time a message is recorded, the date and time will also be stored.
When playing back a message, the date and time of the recording will be announced before
the message. The language of the Voice Prompt is indicated on the giftbox. The display
language of the device functions is the same as the voice prompt.
13.4 Number of rings
To set the number of rings before the telephone answers a call:
•
Press and hold the on/off button until 'AUTO RINGER X' is displayed.
•
Press
or
If you set the number of rings to 1, the talking caller ID will not work because the time for
pronouncing the number is too short.
13.5 Messages
After answering the call, the caller will hear your outgoing message (OGM).
He can record a message (max 30 seconds) after the beep. As soon as you have new
messages the number of new messages will be displayed.
The recording will be interrupted when it detect silence for 7 seconds or when you pick up a
the telephone.
13.6 Playback of Incoming Messages
•
Press
to play all new messages. For each message, the internal voice announces the
day and time the message was recorded.
•
During playback, you can go to next message by pressing
by pressing
•
To stop playback press .
34
.
until 'OGM2 CID NO' is displayed.
to select the number of rings (1-6).
.
and start saying you outgoing message.
briefly.
or to the previous message
Topcom Allure 270
Werbung
Kapitel
Inhaltsverzeichnis
