•
To delete the actual message press and hold
•
To increase the volume during playback, press
•
To decrease the volume, press
•
After you have listened to the new messages, press the and hold
messages.
13.7 Recording a conversation
A conversation of maximum 3 minutes can be recorded.
To start recording, press
To end recording, press
To playback, press
13.8 Memory Full
The display indicates when the memory is full.
When there is a new incomming call when the memory is full, the oldest message will be
deleted.
13.9 Remote Operation
The answering machine can be operated remotely using a touch-tone phone (DTMF tone
selection system).
13.9.1 Setting the security code
The 4 digit remote code is necessary for remote operation (default: 0123).
To set the code:
•
Press
for 3 seconds, the display language is shown.
•
Press repeatedly
•
Enter the new code by means of the numerical keypad.
•
Press
confirm.
If no button is pressed within 10 seconds, the unit will return to standby mode.
13.9.2 Using the remote operation
•
Call your machine, the unit will turn on after 10 rings and you will hear the OGM
message.
•
After the beep, slowly dial the Security code, you will hear one short beeps for
confirmation.
•
Enter the next codes to use the desired function.
Topcom Allure 270
briefly.
for 3 seconds. A beep will confirm that the recording started.
again.
briefly in standby.
until 'SET REMOTE CODE' is displayed.
button during playback of the message.
briefly.
to listen to all stored
Topcom Allure 270
35