Changingthe Door Hinge - Küppersbusch FWKU1800.0S Montage- Und Bedienungsanweisung

Changingthe door hinge

Reversible door for
1. Reassembly the ventilation grilles. Remove the ventilation grille
,2 and the adjustable ventilation grille ○,1 by unscrewing the screws ○,3 & ○,4. (Fig. 1)
○
2. Remove the bottom hinge ○,5 by unscrewing the four lock screws ○,6. Be careful to hold the glass door firmly after removing the
screws. (Fig. 2)
3. Gently pull down to remove the glass door from the right top hinge and place it on a padded surface to avoid the risk of damage. Then
remove the right top hinge ○,9. (Fig. 4)
4. Unscrew and transfer hinge pin ○,7 and/or door stopper ○,8of the bottom hinge to the opposite side. (Fig. 3)
5. Pop out the cover caps on the left side of cabinet and use them to cover the screw holes on the right hand side.
6. Screw the alternative left top hinge ○,11, included in the fittings, on the left hand side of cabinet. (Fig. 4)
7. Rotate the door 180° and relocate the door to the designated position. Then screw the bottom hinge assembly on the left designated
position and tighten it after the door is leveled.
8. Transfer the handles & plugs to the opposite positions and then reassembly the ventilation grilles.
FWKU1800.0S
EN