Basic Safety Instructions - Silvercrest SPLB 44 A1 Bedienungsanleitung Und Sicherheitshinweise

Basic safety instructions

To ensure safe operation of the device, follow the safety guidelines set out below:
■ Check the device for visible external damage before use. Do not operate a
device that has been damaged or dropped.
■ If the cables or connections are damaged, have them replaced by authorised
specialists or Customer Service.
■ This device may be used by children aged 8 years and above and by persons
with limited physical, sensory or mental capabilities, or lack of experience
and knowledge, provided that they are under supervision or have been told
how to use the device safely and are aware of the potential risks. Do not
allow children to play with the device. Cleaning and user maintenance tasks
may not be carried out by children unless they are supervised.
■ DANGER! Do not allow children to play with the packaging material!
Keep all packaging materials away from children. Risk of suffocation!
■ Protect the mains cable from hot surfaces and sharp edges. Ensure that the
mains cable is not taut or kinked. Do not leave the mains cable hanging over
edges (tripping hazard).
■ All repairs to the device and the microphone must be carried out by authorised
specialist companies or Customer Service. Failure to make proper repairs
can put the user at risk. They will also invalidate any warranty claim.
■ Defective components must always be replaced with original replacement
parts. Compliance with the safety requirements can only be guaranteed by
using these replacement parts.
■ Do not make any unauthorised modifications or alterations to the device.
■ Never open the device housing. There are no parts inside the device which
require user maintenance. In addition, this will invalidate the warranty.
■ Always place the device on a stable and level surface. It can be damaged if
dropped. Risk of injury!
■ Do not expose the device to direct sunlight or high temperatures. Otherwise
it may overheat and be irreparably damaged.
■ Be sure to provide sufficient air circulation to avoid a heat build-up.
Never cover the device. There is a risk of fire!
■ Do not place the product near heat sources such as radiators or other
heat-generating devices.
■ Keep the device away from open flames (e.g. candles) at all times.
■ The device is not designed for use in rooms with high temperature or humidity
(e.g. bathrooms) or excessive dust.
SPLB 44 A1
GB │ IE │ 29 ■