Technical Specifications - Ossur Mauch Knee Plus Bedienungsanleitung

ENGLISH
Product no:
MKN01660
MKN01661
MKN01662
MKN01663
MKN01664
MKN01665
MKN01666
MKN01667
APPLICATION
The Mauch
®
fittings.

TECHNICAL SPECIFICATIONS

• Maximum weight 166kg (366lbs)
• Net weight = 1210g (2.67lbs)
• 125° knee flexion available
FUNCTION & DESIGN
• Single-axis hydraulic knee system with swing control (S) or swing and
stance control (SNS).
• Designed for multispeed ambulation.
• Yielding stance control (with SNS package).
• Mode selector switch allows for manual locking and free swing
functions (with SNS package).
• The frame is constructed of aircraft-grade aluminum optimized for
strength.
• Universal 4-hole mounting patterns for versatile adapter options.
• Through hole configuration as optional.
• Side load spherical bearings at knee axis and high-tech bearings
ensure:
– Smoother motion
– Reduced play
– Increased durability
CAUTION
important: All components (adapters, screws and bolts), used with
Mauch Plus Knee must be rated to 166kg (366lbs). Failure to comply may
result in an injury and void the warranty.
Care should be taken with some component arrangements and / or
alignment. It can limit knee flexion and cause damage to the knee frame
or the cylinder, and may void the warranty as a result.
Össur recommends:
Össur Standard Adapters:
• Rated to 166kg (366lbs) High Impact
ALIGNMENT: (Figure B)
The alignment reference line is equal to the weight line.
• Establish a vertical pylon.
• Establish the knee center height.
• Establish the appropriate socket angles. 5 degrees of socket flexion is
recommended.
• Position the socket so that the alignment reference line bisects the
lateral wall at the ischial level of the socket and falls through or
slightly posterior to the knee axis.
5
Description:
SNS
SNS – LOW RESISTANCE
SWING ONLY
THRU HOLE – SNS
THRU HOLE SNS – LOW RESISTANCE
THRU HOLE – SWING ONLY
SNS – HIGH STANCE RESISTANCE
THRU HOLE SNS – HIGH STANCE RESISTANCE
Knee Plus is exclusively used for lower limb prosthetic