Operating - Fakir EYE Bedienungsanleitung

Operation
1. Hold the iron in a tilted position, then fill proper water
into water tank. by measuring cup, you had better use
purified water with less calcium particles and make
sure not to exceed Max level on the tank. (Fig 1.)
2. Press down cover of water tank and you will hear a
click if it is in the correct position.
3. Connect plug to outlet and turn temperature dial to
your desired setting, which is depended on the fabric
of garment. And indicator light will be illuminated.
Refer to Fig.2 and IRONING TIPS latter.
4. Make sure steam button is on dry position. (See fig
3), then place the iron vertically (See fig 4).
5. Once soleplate temperature has reached the preset
temperature, indicator light will be off, then set steam
button to your desired steam output or dry position
and begin ironing.
6. Press spraying water button a couple of times to
moisten the laundry if necessary, before spraying
make sure that there is enough water in water tank.
7. Steam shot function had better be used at max
temperature, as it helps remove stubborn creases.
8. The iron has an anti-drip function: if ironing garments
for long time, soleplate temperature will fall off, the
iron will stop coming out steam automatically and no
water droplets can come out from soleplate.
9. "Steam shot" can also be applied when holding the
iron in a vertical position, so this is useful for
removing creases from hung clothes, curtains, etc.

OPERATING

17
EN
(Fig. 1)
(Fig. 2)
(Fig. 3) (Fig. 4)