Avocent SwitchView Bedienungsanleitung Seite 11

Keyboard
Keyboard is inoperable on one or more channels
Verify that the cables from the PC to the SwitchView are
connected properly.
Verify that the keyboard is plugged into the keyboard
port in the User Console area on the rear panel of the
unit.
Verify that the keyboard works properly connected
directly to the computer. If not, try a different keyboard.
If the keyboard still does not function, cycle power on all
attached computers and try again.
Keyboard is inoperable after switching channels or
characters on screen do not match keyboard input
Try changing the keyboard scan set by using the key-
board command sequence: <CTRL><CTRL>Kn<Enter>,
where n is a scan set number 1-3.
If you require any further assistance, please contact
Avocent Customer Support.
9