Avocent SwitchView Bedienungsanleitung Seite 10

SwitchView
User Manual
8
Mouse
Mouse jumps or "hugs" screen
If the mouse has been hot-plugged while running in
Windows, you may need to close and restart Windows.
If the mouse still does not function, try the mouse resyn-
chronization command: <CTRL><CTRL>ZM<Enter>.
Mouse is inoperable on one or more channels
Try the mouse reset command: <CTRL><CTRL>MR<Enter>
or <CTRL><CTRL>MW<Enter> depending on the type of
mouse you have. Check the table below for the appropriate
keyboard sequence. If your mouse type is not listed, use the
MR keyboard sequence.
Verify that the mouse is plugged into the mouse port in
the User Console area on the rear panel of the unit.
Verify that the computer works properly with a mouse
connected directly to it. If not, try another mouse.
If you are using a serial mouse, verify that you are using
an Avocent Serial Mouse adaptor.
Peripheral Mouse
Logitech MouseMan Wheel
Logitech Trackman Marble Wheel
Logitech Wheel Mouse
Logitech Trackman Marble FX
Logitech Marble Mouse
Three Button
Microsoft IntelliMouse
Microsoft Explorer
Microsoft
Intellipoint
MouseWare
Driver
MW
MW
MW
MR
MR
MR
MW
MW
Logitech
Driver
MR
MR
MR
MR
MR
MR
MW
MW