Progress PVS1550 Benutzerinformation Seite 8

8 Progress
German de-
grees (°dH)
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
How to set the water softener
level
The appliance must be in programme
selection mode:
1. To enter the user mode, press and hold
simultaneously
indicators
flash.
2. Press .
• The indicators
• The indicator
flash.
• The indicator
number of flashes indicates the level.
– E.g. 5 flashes + pause + 5
flashes = level 5.
3. Press repeatedly to change the
setting. Each time you press
level number increases. After level 10
you will start again from level by 1.
4. Press the on/off button to confirm the
setting.
French de-
grees (°fH)
76 - 83
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
<7
and until the
, and start to
and go off.
continues to
starts to flash. The
mmol/l Clarke de-
7.6 - 8.3
6.5 - 7.5
5.1 - 6.4
4.0 - 5.0
3.3 - 3.9
2.6 - 3.2
1.9 - 2.5
0.7 - 1.8
<0.7
The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
Use of rinse aid and multi-
tablets
When you activate the option Multitab, the
rinse aid dispenser continues to release
rinse aid. However you can deactivate the
rinse aid dispenser. In this case the drying
results may not be satisfactory.
With the rinse aid dispenser deactivated,
the rinse aid indicator is always off.
How to deactivate the rinse aid
dispenser
the
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
indicators
flash.
2. Press
Water softener
grees
53 - 57
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
and until the
, and
.
level
9
8
7
6
1)
5
4
3
2
2)
1
start to