Overview - Sony CA-950 Bedienungsanleitung

Overview

Component digital signal transmission system
Large transmission capacity
Anti-electrical shock function
Variety of input/output connectors
4(E)
The CA-950/950P Camera Adaptor attaches to the BVP-9500WS/
9500WSP or BVP-950/950P Color Video Camera to allow the connection
of a CCU-900/900P-series Camera Control Unit through an optical fiber
cable.
The CA-950/950P has the following features:
The CA-950/950P transmits a 10-bit component digital signal through an
optical fiber cable.
The CA-950/950P transmits digital signal of three cameras, which enables
an establishment of Dual Camera System or Super Motion Camera
System.
The high-voltage supply from the camera control unit (CCU) is cut when
the triax cable is not completely connected.
The CA-950/950P is equipped with the following connectors:
• DC power input/output connector
• Input connector for remote-switching of return video 1, 2, and 3
• Prompter signal/external sync signal input connector
• RCP connector
• INCOM connector (2)
• AUDIO (LINE/MIC switch available) input connector (2)
• TEST/RET video output connector
• EARPHONE jack
• TRACKER connector
• SERIAL DIGITAL input/output connector