Technical Data; Technical Specifications - Nibe EME 20 Installateurhandbuch

MENU 7.2.19 - EXTERNAL ENERGY METER
Here, you make settings for the energy meter.
PULSED ENERGY METER
Set mode
Setting range: energy per pulse / pulses per kWh
Energy per pulse
Setting range: 0 – 10000 Wh
Pulses per kWh
Setting range: 1 – 10000
PULSED ENERGY METER
The energy meter(s) is used to send pulse signals every
time a certain amount of energy has been consumed.
energy per pulse: Here you set the amount of energy
to which each pulse will correspond.
pulses per kWh: Here, you set the number of pulses
per kWh that are sent to the heat pump/indoor mod-
ule/control module.

Technical data

TECHNICAL SPECIFICATIONS

EME 20
External; dimen- mm
sions (LxWxH)
Enclosure class
Part no.
EME 20 | GB
81x81x28
IP22
057 188
13