Installation - Simons Voss Technologies LockNode SREL2.G2 Kurzanleitung

2. Installation

tion manual. Other languages (drafting in the con-
tract language) are (non-binding) translations of
the original instructions.
NOTE
Read and follow all installation, installation, and
commissioning instructions. Pass these instructions
and any maintenance instructions to the user.
2. Installation
Power supply disconnected.
ü
1. Remove the protective film on the adhesive side of the
foam LockNode spacer.
2. Insert the LockNode into the slot of the spacer with the
side facing away from the base.
3. Push the housing openings inwards to open the cover of
21 / 96 | EN