General Functions; Automatic Switch-Off - Grundig M 2050 BT DAB+ Bedienungsanleitung

GENERAL­FUNCTIONS
Switching­on­and­off
The only way to disconnect the hi-fi system from
the mains supply is to pull out the plug.
1 Switch on the hi-fi by pressing »
the device.
– The last input source used is automatically
selected.
Note:
The hi-fi system can also be switched on by
7
pressing» 8 «, »FM/DAB«, »CD«, »USB« or
AUX« on the remote control.
»
2
Switch the hi-fi system to standby mode by
pressing » 8 «.
ECO­mode
The hi-fi system switches to standby in the ECO
mode after 15 minutes. This lowers the power con-
sumption to below 0.5 W.
In ECO mode, the time display disappears; you
can display it by pressing »
1
In ECO mode, press »
– The clock is displayed
2
In ECO mode, press and hold down »
seconds.
– The device switches to standby, the clock is
displayed.
– The device switches back to ECO mode after
15 minutes.
Automatic­switch-off
The device switches off automatically after 15
minutes in standby mode if:
– the device is in the stop position;
– there is no audio signal detected at the
»AUX­IN« socket;
– the Bluetooth auxiliary devices is not sending
an audio signal.
To use the device, switch it back on.
Adjusting­the­volume
1 Turn the control knob on the hi-fi system or press
» – ­+« on the remote control to change
V
the volume.
30­
ENGLISH
8 « or » « on
¥
«.
¥
« once.
8 « for two
­---------------------------------------------------------------------------------------
Selecting­sound­settings
You can choose between preset sound settings.
1 Select the sound setting using »DSC« on the
remote control.
Enhancing­the­bass
1
Enhance the bass with »S-BASS­+« on the re-
mote control.
Loudness
The loudness function provides better sound at
lower audio volumes.
1 Switch loudness on and off using »
« on the remote control.
NESS
Note:
If you select a sound setting, this cancels your
7
adjustment of the bass, treble or loudness.
Muting
You can switch the hi-fi speakers to and from
mute mode with this function.
1
Activate mute with » « on the remote control.
2 Deactivate mute with » « on the remote con-
trol.
Displaying­the­time­
1
Display the time with »
trol.
Setting­the­brightness­of­the­dis-
play
1
Adjust the brightness of the display (3 stages)
R
with » « on the remote control.
LOUD-
¥
« on the remote con-