Setting Up The Display (Network Adaptor); Setting Up From The Display; Setting The Password - Sony BKM-B30NW Bedienungsanleitung

Setting Up the Display (Network Adaptor)

Basic setups such as IP address and wireless LAN
settings are necessary for networking operations of the
Display (Network Adaptor). You can set them up
either from the Display (Network Adaptor) or a
computer connected to the same LAN.
Before setting up
• Attach the Network Adaptor to the PFM-42B1.
• Turn on the Display with the #/ 1 key on the Remote
Commander supplied with the PFM-42B1 or control
panel of the Display.
• Press the OPTION key on the Remote Commander to
set the input to INPUT 3 PC. The Start up Window is
displayed.
• When you set up from the Display, operate with the
supplied mouse and keyboard or connected keyboard.
For information on the screen keyboard, see page 31 (GB).
• After the above preparations, turn on the computer
from which you set up the Display.
10
(GB)

Setting Up from the Display

Setting the password

You can set a password for protection against access
from remote network users.
1
Click Desktop View in the Start up window.
2
From the Start menu, click Control Panel in the
Desktop window.
3
Double-click the Password icon.
The Password Properties dialog box appears.
Password Properties
Administrator
Name: _ root
User
Name: _
4
Specify the Password for Administrator, then enter
the same password again in the Confirm password
text box for Administrator.
The Name of Administrator is preset as "root" at
the factory. It cannot be changed.
5
Specify the Name and Password for User, then
enter the same password in the Confirm password
text box for User.
When you are required to enter the password for
Administrator or User while you are operating the
Display from a computer, enter the Name and
Password which you set in steps 4 and 5.
Password: _ I
_ Confirm password:
Password: _
_ Confirm password: