Sony BKM-B30NW Bedienungsanleitung Seite 55

Setting the password
1
Click the Password icon in the Setup window.
The password setting dialog box appears.
Setup procedure is the same as that operated by the
Display.
For details, see "Setting the password" on page 10
(GB).
2
Click the APPLY button.
Setting up the network configuration
1
Click the Network icon in the Setup window.
The Network configuration window appears.
In this window you can set the items described in
steps 5 to 8 in "Setting up the network
configuration" on page 11 (GB).
For details, see "Setting up the network configuration"
on page 11 (GB).
2
Click the APPLY button.
The window for restart appears.
3
Click the RESTART button.
The display's screen is turned off for about 10
seconds, then the display restarts.
The network setting does not take effect until you
restart the Display (Network Adaptor).
Setting up the wireless LAN environment
1
Click the Wireless LAN icon in the Setup window.
The dialog box for setting the Nickname, Access
Point ID, Encryption Key and Peer to Peer appears.
Setup procedure is the same as that operated by the
Display.
For details, see "Setting up a wireless LAN
environment–Using a wireless LAN access point/Peer to
Peer (Ad-hoc) mode" on pages 12 (GB) and 13 (GB).
2
Click the APPLY button.
15
(GB)