Operations from a Computer
qg DISPLAY buttons
Select ON to display the input signal information for
about five seconds at the top of the Display screen
when the power is turned on or when switching the
input signal.
CONFIG window
qh POWER SAVING
Sets the power saving mode.
After setting, click APPLY.
qj ON/OFF TIMER
Sets the on-timer.
After setting, click APPLY.
qk PIC INVERSION
Sets the picture inversion mode.
After setting, click APPLY.
ql PIC ORBITING
Sets the display position.
After setting, click APPLY.
30
(GB)
STATUS window
w; MODEL NAME
Indicates the model name.
wa SERIAL No.
Indicates the serial number.
ws OPERATION
Indicates the total number of hours of operation.
wd PFM SOFTWARE
Indicates the system software version.
wf TEMPERATURE
Indicates whether the internal temperature of the
Display is normal.
wg FAN
Indicates whether the cooling fans work properly.