Expansion Process Jrg Sanipex Mt D50 + D63 - JRG Sanipex MT 4810.000 Bedienungs- Und Wartungsanleitung

JRG Sanipex MT
5.1.3 Expansion Process JRG Sanipex MT
Insert the end of the pipe fully
flush into the expansion tool.
Remark
Fitting the pipes into the expansion tool
Before closing the tension lever, make sure that the pipe is fitted
parallel into the expansion tool.
®
Installation instructions
d50 + d63
®
Push the pipe fully flush into the
expansion mandrel and close the
tension unit. Start flaring process.
77