JRG Sanipex MT 4810.000 Bedienungs- Und Wartungsanleitung Seite 75

JRG Sanipex MT
Plug the flared JRG Sanipex MT
onto the JRG Sanipex MT fitting.
Checking of the flaring process:
The O-ring on the fitting has to be com-
pletely covered by the pipe flare!
Remark
Ratchet torque wrench
The JRG Sanipex MT
of the JRG Sanipex MT
ry adjusted and do not need an additional maintenance if it is used for the
defined work.
Warning
Malfunctioning of the ratchet torque wrench
If you have any malfunctioning or damaged torque wrench, we recommend to replace
the JRG Sanipex MT
Warning
Repair of ratchet torque wrench
It is not allowed to make any repair work on the JRG Sanipex MT
wrench.
®
pipe
®
®
torque wrench must be used exceptional for tightening
®
cone grip unions. the corresponding torque's are facto-
®
torque wrench with a exchange wrench, which is available.
Installation instructions
Tighten the union nut with the ratchet
torque spanner 4832 until an audible
"click" can be heard. For countering, if so
required apply the counter-action spanner
4834 to the JRG Sanipex MT fitting.
®
®
torque
75