Maintenance; Introduction; Checking The Hydraulic Oil Level; Device Servicing - JRG Sanipex MT 4810.000 Bedienungs- Und Wartungsanleitung

JRG Sanipex MT
4

Maintenance

4.1

Introduction

JRG Sanipex MT
require special maintenance by the user.
Remark
Repairs
No repairs or modifications of any kind whatsoever must be carried
out on the JRG Sanipex MT
4.2

Checking the hydraulic oil level

• If the oil level is so low, that it is not visible in the sight glass,
then hydraulic oil has to be replenished at the red fill
opening. (Maximum oil level: OK sight glass).
• For replenishing the hydraulic oil, remove the red aeration - and venting screw
plug at the oil fill opening (6) with the counter-action spanner d16
(JRG art. No. 4834.016).
Replenish with hydraulic oil (JRG No. 4839.000).
Remark
Hydraulic oil
Only original JRG Sanipex MT
4.3

Device Servicing

After 70'000 operating cycles, the LED (16) "Service" lights up. In the interest of
operational safety, the complete JRG Sanipex MT
sales point at the next opportunity for overhaul.
®
® tools with the exception of those checks listed below do not
Installation instructions
® tools.
hydraulic oil must be used.
®
® tool has to be returned to the
73