Presentation And General Aspects; Characteristics Of The Machine; Maintenance - JMA Vienna Smart Anweisungshandbuch

1.- PREsENtAtION AND GENERAL AsPECts

.1 general Points
1
1.2 transPort and PacKing
1.3 identiFication label

2.- CHARACtERIstICs OF tHE MACHINE

2.1 Parts oF the KeY
2.2 Main eleMents oF the Machine
2.3 technical inForMation
2.4 coMPonents and Functional Parts
2.4.1 accessories
2.4.2 electric circuit
2.4.3 Four-sided claMP
3.- HOW tO OPERAtE tHE MACHINE
3.1 Machine adJustMent
3.1.1 dePth adJustMent
3.1.2 side adJustMent
3.5 KeY cutting
3.2.1 cutting KeYs with a narrow blade
3.2.2 cutting KeYs without shoulders
3.2.3 cutting cross-shaPed KeYs

4.- MAINtENANCE

4.1 rePlacing the brush
4.2 rePlacing the cutter
4.3 rePlacing the tracer
4.4 adJusting the MaXiMuM dePth oF the slide
4.5 rePlacing the Fuses
4.6 rePlacing the start switch and the brush button
4.7 rePlacing and/or tightening the belt
4.8 rePlacing the Motor
4.9 rePlacing the Motor caPacitor
4.10 tensing the carriage
4.11 rePlacing the Micro switch
5.- sAFEtY
6.- WAstE DIsPOsAL
6
.1 PacKing
6.2 swarF
6.3 Machine
7.- EXPLODED VIEW