Safety.warnings.for.the.environmental.impact - VM Motori R750EU5 Gebrauchsanweisungenhandbuch

–If appropriate, before using the engine
for the first time, after gathering all the
necessary information, simulate a few
trial manoeuvres to identify the controls
GB
and their main functions, especially those
related with starting and stop operations.
–Do not operate the engine in a closed
and insufficiently ventilated environment;
the exhaust fumes are harmful and can
have serious consequences on people's
health.
–Do not keep using the engine if ano-
malies are detected and in particular if
suspect vibrations occur.
–In case of anomaly, stop immediately the
engine or reduce the speed as much as
possible and reach the closest assistance
centre.
–Start again the engine only when the
normal operating conditions have been
restored.
–Unless otherwise stated, all interventions
should be carried out when the engine
has been stopped, cooled down and the
ignition key has been removed. Those
authorized to carry out these interventions
should follow all the precautions needed
to guarantee the safety of the people
involved, in compliance with the require-
SAFETY WARNINGS FoR THE ENVIRoNmENTAL ImPACT
Each organization is responsible for
implementing procedures aimed at
identifying, evaluating and controlling the
environmental impact of its own activities
(products, services, etc.).
The procedures to be followed to identi-
fy any significant environmental impact
should take into account the following
factors:
–Emissions in the atmosphere
–Discharged liquids
English
R750EU5 - IE3 - TE4 - IE4 - ISE4
ments laid down in the applicable legisla-
tion regarding safety at the workplace.
–Keep the equipment as much efficient
as possible and carry out the scheduled
maintenance operations established by
the manufacturer. A good maintenance
will ensure the highest performance, a
longer working lifetime and a constant
compliance with safety requirements.
–Replace any worn part with original
spare parts. Use the oils and greases re-
commended by the manufacturer. All this
will ensure the engine good operation and
the prescribed safety level.
–Do not throw away any polluting ma-
terial in the environment. Carry out their
disposal in compliance with the relevant
legislation in force.
–During all maintenance operations
always use the individual protection
clothing and/or devices indicated in the
operating instructions supplied by the
manufacturer and those provided by the
applicable legislation concerning safety at
the workplace.
–All maintenance operations should be
carried out by using suitable and efficient
equipment and tools.
–Waste disposal
–Soil contamination
–Use of raw materials and natural resour-
ces
– Local problems related to the environ-
mental impact
In order to reduce the environmental
impact, the manufacturer provides below
a few indications to be taken into account
by all those who will interact with the engi-
ne throughout its expected life.
22 Ed.8 / 0-202