Fuel.filter.replacement - VM Motori R750EU5 Gebrauchsanweisungenhandbuch

FUEL FILTER REPLACEmENT
Follow the procedure below.
1- Turn off the engine and remove the
ignition key.
2- Let the engine cool down adequately to
avoid being burnt.
3- Prepare a container to collect any leak.
4- Disassemble filter(Z) and replace it.
5- Fill the new filter with fuel from the filter
you have just removed.
6- Lubricate the gasket of the new filter
before mounting it.
7-Refit the filter.
8- Bleed air from the fuel supply circuit.
(See "Fuel supply circuit bleeding")
9- Turn the engine on and check for any
fuel leaks.
English
R750EU5 - IE3 - TE4 - IE4 - ISE4
Fuel Filter (Z)
If any fuel leaks are found, stop the
engine immediately and contact an
authorised service centre.
Do not throw away any polluting
material in the environment. Carry out
their disposal in compliance with the
relevant legislation in force.
55 Ed.8 / 0-202
GB