FLAEM Wi.Neb go Bedienungsanleitung Seite 18

ENGLISH
16 -
HOW TO CONNECT THE ACCESSORIES
Prior to each use, carefully wash your hands and clean your Wi Neb according to the instructions provided in the "CLEANING,
SANITIZATION AND DISINFECTION" section. During the application you should use adequate protection against any drips.
The average lifespan of accessories is 1 year; however, we recommend you replace the nebulizer every 6 months in intensive
use (or earlier, if the nebulizer is blocked) to always ensure maximum therapeutic effect. The nebulizer and accessories are for
personal use only to prevent possible risk of infection due to contamination. This device is suitable for the administration of
medical substances and not, for which the administration via aerosol is foreseen;
these substances are to be in any case prescribed by the Doctor. In case of too
thick substances, the dilution with a suitable physiological solution could be need-
ed, according to the medical prescription. Use original FLAEM accessories only.
Connect one end of the connection hose (E) to the device.
Connect the other end of the hose (E) to the L-fitting (F).
Connect the L-fitting (F) to the nebulizer (G).
Insert the nebulizer (G) in its housing on the device (A).
G4
G1
Insert the nozzle (G2) in the upper part (G1) pressing as shown by the
2 arrows. Insert the Speed selector with valve (G4) in the upper part
(G1).
G2
Pour in medication.
Close the nebulizer by simply turning the lid clockwise.