Technical Data Dcc 8 Plus - detectomat DCC 8 plus Bedienungsanleitung

10 Technical data DCC 8 plus

Zones:
• DCC 8 plus
Maximum number of detectors per zone:
Thresholds for zone conditions:
0 - 2 mA
2 - 10 mA
10 - 110 mA
110 mA ~
Power Supply
Main Power supply
Standby Power supply
Consumption from 230 V:
(fully charged battery)
Consumption at mains power supply failure:
(normal working mode):
Consumption at mains power supply failure:
(in Fire alarm condition)
Outputs
Sounder Circuits SND1 – SND4 (Main Board)
Sounder Circuits SND1 – SND4 (Sounder Expander)
Fault Relay, volt free changeover contacts*
Fire Relay, volt free changeover contacts*
Note!
These functions may not be used to provide any "Options with requirements"
as specified in EN 54-2.
Auxiliary output:
Cabling / Wire length
Minimum J-Y(St)Y 2x2x 0,6 mm²
J-Y(St)Y 2x2x 0,8 mm²
Maximum J-Y(St)Y 3x 1,5 mm²
Environment:
Working temperature
Storage temperature
Humidity
Version 1.0
Bedienungsanleitung DCC 8 plus
Standard 8 detector zones
Up to 20 conventional detectors and
unlimited number of manual call points.
Open circuit fault condition.
Normal condition.
Fire Alarm condition.
Short circuit condition.
230 V AC ±10%
2 A fuse, T-Type.
1 x accumulator battery 12 V / 18 Ah
Dimensions – 167 x 181 x 76 mm
Voltage Output – UCharge = 13,8 V
Current Output – Imax
7 A Fuse, Resettable (PTC)
2,1 V A at 4 zones (1 Zone Expander)
4,2 V A at 16 zones (4 Zone Expanders)
130 m A with connected 1 Zone Expander
260 m A with connected 4 Zone Expanders
330 m A at 1 Zone Expander
720 m A at 4 Zone Expander
+24 V / 0.3 A, Resettable fuse (PTC)
+24 V / 0.15 A, Resettable fuse (PTC)
+12 V / 1 A or 24 V / 0,5 A
U = 125 V; I
Max
+12 V / 1 A or 24 V / 0,5 A
U = 125 V; I
Max
Check the EOL proper polarity and position.
+24 V DC / 0.3 A Fuse
Wire length max.: 820 m
Wire length max.: 1100 m
Wire length max.: 2000 m
-5 °C ÷ +40 ºС
-20 °C ÷ +60 ºС
Up to 93 %
13
= 2 A
= 2 A
Max
= 2 A
Max