Operation And Functions; Enabling/Disabling Zones; To Disable Zone 1; To Enable Zone 1 - detectomat DCC 8 plus Bedienungsanleitung

User manual DCC 8 plus

8 Operation and functions

8.1

Enabling/Disabling zones

8.1.1

To Disable Zone 1:

Press [ ENABLE / DISABLE ]:
Press [ ENABLE / DISABLE ]:
Press [ RESET ]:
8.1.2

To Enable Zone 1:

Press [ ENABLE / DISABLE ] TWICE:
Press RESET.
8.1.3

To Disable Zone 2:

Press [ ENABLE / DISABLE ]:
Press [ TEST / SCROLL ]:
Press [ ENABLE / DISABLE ]:
Press [ RESET ]:
8.1.4

To Enable Zone 2:

Press [ ENABLE / DISABLE ]:
Press [ TEST / SCROLL ]:
Press [ ENABLE / DISABLE ]:
Press [ RESET ]:
Version 1.0
Note!
Pressing [ Enable/Disable ] (Maintenance mode) will sound the internal
buzzer. This can be deactivated by pressing [ Silence Buzzer ].
Note!
Enabling and disabling of zones 3 - 16 are done in the same way as pressing
[ TEST/ SCROLL ] button till reaching the desired zone and choosing
consequently buttons [ DISABLE / ENABLE ] and [ RESET ].
10
Zone 1 LED will flash.
DISABLE / ENABLE LED will flash.
The zone LED will become steady.
At this point the zone 1 is disabled.
Zone 1 LED will flash.
DISABLE / ENABLE LED will flash.
At this point the zone 1 is enabled.
Zone 1 LED will flash.
ENABLE / DISABLE LED will flash.
Zone 2 LED will flash.
ENABLE / DISABLE LED will flash.
Zone 2 LED will become steady.
ENABLE / DISABLE LED will flash.
At this point the zone 2 is disabled.
Zone 1 LED will flash.
ENABLE / DISABLE LED will flash.
Zone 2 LED will be steady.
ENABLE / DISABLE LED will flash.
Zone 2 LED will flash.
ENABLE / DISABLE LED will flash.
At this point zone 2 is enabled.