Operation - Klarstein 10032348 Bedienungsanleitung

EN
22

OPERATION

All functions can be operated by tickling the buttons on the control panel..
When first plug in, the fan with "Bi Bi" sound alerts, then the fan will under standby
status, in which no button works except "ON/OFF".
On/Off
1. No button works except "ON/OFF" when the fan under standby status. It starts to
work after pressed "ON/OFF". The fan starts with Med speed, and turns to Low
speed in three seconds, the Led lights on correspondingly. The fan works in normal
speed, no time setting and oscillation function.
2. Press " ON/ OFF" when the fan is working, the fan will turn to standby after "BI---"
sound.
3. After turning on under standby state, the fan keeps the same working state as
before turning off, besides the time setting and wind modes. (When the fan is in Hi
or Low speed before turning off, it will start with Med speed when turn on again,
and shift to the memorised speed after 3s)
Speed
Press "SPEED" button to set the wind speed at the rule of --L--M--H--L... and LED light
changes accordingly.
Swing
1. Manually Vertical oscillation: -8°, 0°, 10°, 20°, 30°, 40°, 50°, 60°, 70°, 80°,
90° adjust according to users.
2. Horizontal oscillation can be any angle in 0-360° by hand;
3. Automatically horizontal oscillation, press "SWING" button to set the oscillation
as the rule of 0(stop horizontal oscillation), 60°, 90°, 180°, 360°, 0(stop
oscillation)..., and led light changes accordingly.
Mode
The fan is initially set at normal mode when turning on. Press MODE button, it will
change as the rule of
normal > nature > sleep > normal
The display will show accordingly:
1. Normal wind
High wind speed high -----
Medium wind speed medium ----'
Low wind speed low ----
2. Natural wind
Natural wind includes three wind mode, high, med, low, detail progress waveform
showed as following picture