Operation; Care And Cleaning - Klarstein Standventiltor Bedienungsanleitung

EN
18

OPERATION

Place the fan on a flat and stable surface. Make sure the Off/Speed knob is in
Off position ("0") then plug it into a correct socket. To select the desired speed it's
enough rotate the Off/Speed knob; the desired speed must be aligned at the reference
dot place on the motor. If the fan is working the light ring will be on; if the fan is off, the
light ring will be off.
0 off
1 minimum speed
(1) minimum speed with left/right oscillation
(2) medium speed with left/right oscillation
(3) maximum speed with left/right oscillation

CARE AND CLEANING

Note: Before carrying out the regular cleaning operations turn the fan off and unplug it.
• For external cleaning use a soft and dry cloth.
• DO NOT disassemble the fan: this fan cannot be disassembled. DO NOT dip the
device in water, or splash it with any other liquids.
• DO NOT use solvents or any other chemical products for cleaning it.
• Pack the fan in the original box and place it in a dry, well-ventilated place when it
is not to be used for a long period of time.
Reference dot
2 medium speed
3 maximum speed