Input Specifications; Output Specifications - Yamaha MG124CX Bedienungsanleitung

Reference
Specifications
■ Input Specifications
Input Connectors Gain
–60 dB
CH INPUT MIC
(CHs 1-4)
–16 dB
–34 dB
CH INPUT LINE
(CHs 1-4)
+10 dB
ST CH MIC –60 dB
INPUT
–16 dB
(CHs 5/6, 7/8)
ST CH LINE –34 dB
INPUT
+10 dB
(CHs 5/6, 7/8)
ST CH INPUT
—
(CHs 9/10, 11/12)
CH INSERT IN
—
(CHs 1-4)
RETURN (L, R) —
2TR IN (L, R) —
Where 0 dBu = 0.775 Vrms and 0 dBV= 1 Vrms
* Sensitivity : The lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to the maximum
level. (All faders and level controls are at their maximum position.)
■ Output Specifications
Output Connectors
STEREO OUT (L, R)
GROUP OUT (1, 2)
EFFECT/AUX
(AUX1, 2*) SEND
CH INSERT OUT
(CHs 1-4)
REC OUT (L, R)
MONITOR OUT (L, R)
PHONES OUT
Where 0 dBu = 0.775 Vrms and 0 dBV= 1 Vrms
* The MG124CX feature is described first, followed by the MG124C feature in brackets: MG124CX (MG124C)
68
MG124CX/MG124C Owner's Manual
Input Appropriate
Sensitivity *
Impedance Impedance
–80 dBu (0.078 mV)
50–600Ω
3kΩ
Mics
–36 dBu (12.3 mV)
–54 dBu (1.55 mV)
600Ω
10kΩ
Lines
–10 dBu (245 mV)
–80 dBu (0.078 mV)
50–600Ω
3kΩ
Mics
–36 dBu (12.3 mV)
–54 dBu (1.55 mV)
600Ω
10kΩ
Lines
–10 dBu (245 mV)
600Ω
10kΩ –30 dBu (24.5 mV)
Lines
600Ω
10kΩ –20 dBu (77.5 mV)
Lines
600Ω
10kΩ –12 dBu (195 mV)
Lines
600Ω
10kΩ –26 dBV (50.1 mV)
Lines
Output Appropriate
Impedance Impedance
75Ω 600Ω Lines
150Ω 10kΩ Lines
150Ω 10kΩ Lines
75Ω 10kΩ Lines
600Ω 10kΩ Lines
150Ω 10kΩ Lines
100Ω 40Ω Phones
Nominal Level
–60 dBu (0.775 mV)
–16 dBu (123 mV)
–34 dBu (15.5 mV)
+10 dBu (2.45 V)
–60 dBu (0.775 mV)
–16 dBu (123 mV)
–34 dBu (15.5 mV)
+10 dBu (2.45 V)
–10 dBu (245 mV)
0 dBu (0.775 V)
+4 dBu (1.23 V)
–10dBV (0.316V)
Max. before
Nominal Level
clipping
+4dBu (1.23 V) +24 dBu (12.3 V)
+4dBu (1.23 V) +20 dBu (7.75 V)
+4dBu (1.23 V) +20 dBu (7.75 V)
0 dBu (0.775 V) +20 dBu (7.75 V)
–10 dBV (0.316 V) +10 dBV (3.16 V)
+4 dBu (1.23 V) +20 dBu (7.75 V)
3 mW 75 mW
Max. before Clip- Connector Specifica-
ping tions
–40 dBu (7.75 mV) XLR-3-31 type (bal-
anced [1 = GND, 2
+4 dBu (1.23 V)
= HOT, 3 = COLD])
–14 dBu (155 mV) TRS phone jack
(balanced [Tip =
HOT, Ring = COLD,
+30 dBu (24.5 V)
Sleeve = GND])
–40 dBu (7.75 mV) XLR-3-31 type (bal-
anced [1 = GND, 2
–6 dBu (389 mV)
= HOT, 3 = COLD])
–14 dBu (155 mV)
Phone jack
(unbalanced)
+30 dBu (24.5 V)
Phone jack (unbal-
+10 dBu (2.45 V) anced)
RCA pin jack
TRS phone Jack
(unbalanced [Tip =
+20 dBu (7.75 V)
Out, Ring = In,
Sleeve = GND])
Phone jack
+24 dBu (12.3 V)
(unbalanced)
+10dBV (3.16 V) RCA pin jack
Connector Specifications
XLR-3-32 type (balanced [1 = GND, 2
= HOT, 3 = COLD])
Phone Jack (balanced [Tip = HOT,
Ring = COLD, Sleeve = GND])
Phone jack (impedance balanced [Tip
= HOT, Ring = COLD, Sleeve = GND])
Phone jack (impedance balanced [Tip
= HOT, Ring = COLD, Sleeve = GND])
Phone jack (unbalanced [Tip = Out,
Ring = In, Sleeve = GND])
RCA pin jack
Phone jack (impedance balanced [Tip
= HOT, Ring = COLD, Sleeve = GND])
Stereo phone jack