Herunterladen Inhalt Inhalt Diese Seite drucken

Using Steam; Making Cappuccino; Hot Water Selection - Nuova Simonelli AURELIA II Digit Gebrauchanweisungen

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

6.4

USING STEAM

(Manual steam
w and)
CAUTION
RISK OF BURNS OR SCALDING
While using the steam nozzle, you must pay
attention to not place your hands beneath it
or touch just after it has been used.
To use the steam function, pull or push the rel-
evant lever, as shown in the figure.
By pulling it completely the lever will hold a
position of maximum delivery; by pushing it, the
lever will automatically give way.
The two steam nozzles are articulated to guar-
antee their easy use.
NOTE: Before using the steam wand, always
bleed out any condensation for at least
2 seconds or according to the manufac-
turer's instructions.
5 2
6.5
MAKING
CAPPUCCINO
To obtain the typical cappuccino foam, immerse
the nozzle all the way into a container 1/3 full of
milk (preferably cone-shaped). Turn on the
steam. Before the milk starts to boil, pull the
nozzle slightly up and lightly move it vertically
across the surface of the milk. When you have
completed the procedure, clean the nozzle
carefully with a soft cloth.
6.6
HOT WATER
SELECTION
Fig. 18
RISK OF BURNS OR SCALDING
While using the hot water nozzle, pay care-
ful attention not to place your hands beneath
it or touch it just after it has been used.
This nozzle delivers hot water to make tea or
herb teas.
Place a suitable container under the hot water
nozzle. Press the hot water select button once;
the light
will switch on.
The hot water wand will deliver water for the
amount of time equivalent to the set value (see
PROGRAMMING section and the DOSE
PROGRAMMING section) or press the button
again to stop pouring.
NOTE: Hot water can be delivered at the same
6.7
When using autosteam, take great care not
Fig. 19
to place your hands underneath it and never
touch it immediately afterwards.
This serves to deliver steam and the tempera-
ture is controlled by a probe. The temperature is
set during the programming stage.
To enable autosteam, press the steam button
CAUTION
The steam delivery will stop as soon as the set
temperature for the liquid is reached.
NOTE: Steam can be delivered at the same
time as coffee.
AUTOSTEAM
(optional)
CAUTION
RISK OF BURNS OR SCALDING
; the light will switch on.
time as coffee.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis